Toyota 2004 HIGHLANDER Owner'S Manual Download Page 80

Page: 80 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Tab

Buckle

Adjust the seat as needed and sit up

straight and well back in the seat. To
fasten your belt, pull it out of the re-

tractor and insert the tab into the

buckle.

You will hear a click when the tab locks

into the buckle.
The seat belt length automatically adjusts

to your size and the seat position.
The retractor will lock the belt during a

sudden stop or on impact. It also may

lock if you lean forward too quickly. A
slow, easy motion will allow the belt to

extend, and you can move around freely.

When a passenger’s shoulder belt is com-

pletely extended and is then retracted

even slightly, the belt is locked in that
position and cannot be extended. This fea-

ture is used to hold the child restraint

system securely. (For details, see “Child
restraint” on page 85 in this Section.) To

free the belt again, fully retract the belt

and then pull the belt out once more.
If the seat belt cannot be pulled out of the

retractor, firmly pull the belt and release

it. You will then be able to smoothly pull
the belt out of the retractor.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the belt is not twisted.

Do not insert coins, clips, etc. in
the buckle as this may prevent you

from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your
Toyota dealer. Do not use the seat

until the seat belt is fixed, because

it cannot protect an adult occupant
or your child from injury.

Take up

slack

Too high

Keep as low on

hips as possible

Adjust the position of the lap and

shoulder belts.

Position the lap belt as low as possible

on your hips—not on your waist, then ad-
just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

—Fastening front and rear

seat belts

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands