Toyota 2004 HIGHLANDER Owner'S Manual Download Page 85

Page: 85 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

To stow the third seat seat belt, insert

the tabs into the slot as shown above.
Make sure the tabs are securely locked

in the slot.

Seat belt must be stowed before you fold

the seatback. (See “—Folding down third

seat” on page 47 in this Section.)

NOTICE

Stow the third seat seat belt except
when you are wearing it.

If your seat belts cannot be fastened se-

curely because they are not long enough,

a personalized seat belt extender is avail-
able from your Toyota dealer free of

charge.
Please contact your local Toyota dealer to
order the proper required length for the

extender. Bring the heaviest coat you ex-

pect to wear for proper measurement and
selection of length. Additional ordering in-

formation is available at your Toyota deal-

er.

CAUTION

When using the seat belt extender,
observe the following precautions.

Failure to follow these instructions

could reduce the effectiveness of the
seat belt restraint system in case of

an accident, increasing the chance of

personal injury.

Remember that the extender pro-

vided for you may not be safe when

used on a different vehicle, for
another person, or at a different

seating position than the one origi-

nally intended.

If the seat belt extender has been

connected to the driver’s seat belt

buckle without wearing the seat belt

when using the extender in the

driver’s seat, the SRS driver’s air-

bag system will judge that the driv-

er wears the seat belt even if not

wearing it. In this case, the driver’s

airbag may not activate correctly,

causing death or serious injury in

the event of collision. Be sure to

wear the seat belt with the seat belt

extender.

—Stowing the third seat seat

belt

—Seat belt extender

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands