Toyota 2004 HIGHLANDER Owner'S Manual Download Page 131

Page: 131 / 420

’04 HIGHLANDER_U (L/O 0308)

107

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

CAUTION

Do not adjust the mirror while the
vehicle is moving. Doing so may

cause the driver to mishandle the

vehicle and an accident may occur
resulting in death or serious inju-

ries.

Since the mirror surfaces can get
hot, do not touch them when the

defogger switch is on.

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted

Push the switch to “L” (left) or “R”
(right).

2. Control switch—To move the mirror

Push the switch in the desired direc-
tion.

Mirrors can be adjusted when the key is
in the “ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-

ror face. Use a spray de

−

icer to free

the mirror.

—Power rear view mirror

control

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands