Toyota 2004 HIGHLANDER Owner'S Manual Download Page 183

Page: 183 / 420

’04 HIGHLANDER_U (L/O 0308)

159

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Type A

Type B

When parking, firmly apply the parking

brake to avoid inadvertent creeping.

To set: Fully depress the parking brake
pedal. For better holding power, first de-

press the brake pedal and hold it while

setting the parking brake.
To release: Depress the parking brake

pedal once again.
To remind you that the parking brake is

set, the parking brake reminder light in

the instrument panel remains on until you
release the parking brake.
The buzzer will remind you to release the

parking brake when the vehicle speed
rises above 5 km/h (3 mph) with the park-

ing brake is applied.

CAUTION

Before driving, be sure the parking
brake is fully released and the park-

ing brake reminder light is off.

The cruise control allows you to cruise

the vehicle at a desired speed over 40

km/h (25 mph) even with your foot off
the accelerator pedal.

Your cruising speed can be maintained up

or down grades within the limits of engine
performance, although a slight speed

change may occur when driving up or

down the grades. On steeper hills, a
greater speed change will occur so it is

better to drive without the cruise control.

CAUTION

To help maintain maximum control
of your vehicle, do not use the

cruise control when driving in

heavy or varying traffic, or on slip-
pery (rainy, icy or snow

−

covered) or

winding roads.

Avoid vehicle speed increases when
driving downhill. If the vehicle

speed is too fast in relation to the

cruise control set speed, cancel the
cruise control then downshift the

transmission to use engine braking

to slow down.

Parking brake

Cruise control

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands