Toyota 2004 HIGHLANDER Owner'S Manual Download

Page: 109 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Do not put objects under the front

passenger seat.

Child restraint systems installed on
the second seat should not contact

the front seatbacks.

The “AIRBAG ON” indicator light may be

illuminated (the front passenger airbag and

side airbag on the front passenger seat

may deploy) even if observing the above

cautions, when a child sits in, or a for-

ward

−

facing child restraint system is

installed on the front passenger seat. Re-

fer to all the cautions in “SRS airbags” on

page 66 and “Child restraint” on page 85

in this Section.

Toyota strongly urges the use of ap-

propriate child restraint systems for

children.

The laws of all 50 states in the U.S.A.

and Canada now require the use of a

child restraint system.
Your vehicle conforms to SAEJ1819.
If a child is too large for a child restraint
system, the child should sit in the rear

seat and must be restrained using the

vehicle’s seat belt. See “Seat belts” on
page 54 in this Section for details.

CAUTION

For effective protection in automo-
bile accidents and sudden stops, a

child must be properly restrained,

using a seat belt or child restraint
system depending on the age and

size of the child. Holding a child in

your arms is not a substitute for a
child restraint system. In an acci-

dent, the child can be crushed

against the windshield, or between
you and the vehicle’s interior.

Toyota strongly urges use of a
proper child restraint system which

conforms to the size of the child,

installed on the rear seat. Accord-
ing to accident statistics, the child

is safer when properly restrained in

the rear seat than in the front seat.

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”
indicator light is illuminated. In the

event of an accident, the force of

the rapid inflation of the front pas-
senger airbag can cause death or

serious injury to the child if the
rear

−

facing child restraint system is

installed on the front passenger

seat.

Child restraint—

—Child restraint precautions

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands