Toyota 2004 HIGHLANDER Owner'S Manual Download

Page: 285 / 420

’04 HIGHLANDER_U (L/O 0308)

285

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

GASOLINE CONTAINING MMT
Some gasoline contain an octane en-

hancing additive called MMT (Methylcy-
clopentadienyl Manganese Tricarbonyl).

Toyota does not recommend the use of
gasoline that contains MMT. If fuel con-

taining MMT is used, your emission con-

trol system may be adversely affected.
The Malfunction Indicator Lamp on the in-

strument cluster may come on. If this hap-

pens, contact your Toyota dealer for ser-
vice.

GASOLINE QUALITY

In a very few cases, you may experience

driveability problems caused by the partic-

ular gasoline that you are using. If you
continue to have unacceptable driveability,

try changing gasoline brands. If this does

not rectify your problem, then consult your
Toyota dealer.

NOTICE

Do not use gasohol other than
stated above. It will cause fuel sys-

tem damage or vehicle performance

problems.

If driveability problems occur (poor

hot starting, vaporizing, engine

knock, etc.), discontinue the use.

Take care not to spill gasohol dur-

ing refueling. Gasohol may cause
paint damage.

FUEL TANK CAPACITY

72.5 L (19.1 gal., 16.0 Imp. gal.)

The fuel pump shut off system stops sup-

plying fuel to the engine to minimize the

risk of fuel leakage when the engine stalls
or an airbag inflates upon collision. To

restart the engine after the fuel pump shut

off system activates, turn the ignition
switch to “ACC” or “LOCK” once and start

it.

CAUTION

Inspect the ground under the vehicle
before restarting the engine. If you

find that liquid has leaked onto the

ground, it is the fuel system has
been damaged and it is in need of

repair. In this case, do not restart the

engine.

Fuel pump shut off system

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands