Toyota 2004 HIGHLANDER Owner'S Manual Download Page 105

Page: 105 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Your vehicle is equipped with a front

passenger occupant classification sys-

tem. This system detects the conditions

1—4 in the table on page 83 and based

on these conditions activates or deacti-

vates front passenger airbags. The sys-

tem monitors the weight and load on

the front passenger seat, and the seat

belt buckle switch to determine condi-

tions 1—4. In order for the system to

detect the conditions correctly, do not

do any of the following.

Put a heavy load in the front passen-

ger seat.

Attach a seatback table to the front

passenger seat seatback.

Put weight on the front passenger by

putting your hands or feet on the front

passenger seat seatback from the rear

passenger seat.

The “AIRBAG ON” and “AIRBAG OFF”

indicator lights indicate the actuation of

the front passenger airbag, side airbag

on the front passenger seat and front

passenger’s seat belt pretensioner.

The “AIRBAG OFF” indicator light will be

illuminated when the ignition switch is in
the “ON” position with the condition 2 in

the table shown below.

If the front passenger occupant classifica-

tion system determines that a person of

adult size sits in the front passenger seat

but the “AIRBAG OFF” indicator light is

illuminated, one of the following is likely

to have occurred:

A rear passenger lifts the front passen-

ger seat cushion with their legs.

Objects are placed under the front pas-

senger seat.

The front passenger seatback is in

contact with the second seat.

To ensure the system correctly detects an

adult sitting in the front passenger seat,

make sure the above do not occur.
Make sure that the “AIRBAG ON” indicator

light is illuminated when an adult is

seated in the front passenger seat. If the

“AIRBAG OFF” indicator light is illumina-

ted, ask the passenger to sit up straight,

well back in the seat, and with the seat

belt worn correctly. If the “AIRBAG OFF”

indicator light still remains illuminated, ei-

ther ask the passenger to move to the

rear seat, or if that is not possible, move

the front passenger seat fully rearward.

—Front passenger occupant

classification system

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands