Toyota 2004 HIGHLANDER Owner'S Manual Download Page 130

Page: 130 / 420

’04 HIGHLANDER_U (L/O 0308)

106

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

To change the steering wheel angle,

hold the steering wheel, push down the
lock release lever, tilt the steering

wheel to the desired angle and return

the lever to its original position.

CAUTION

Do not adjust the steering wheel
while the vehicle is moving. Doing

so may cause the driver to mishan-

dle the vehicle and an accident may
occur resulting in death or serious

injuries.

After adjusting the steering wheel,
try moving it up and down to make

sure it is locked in position.

Adjust the mirror so that you can just

see the side of your vehicle in the mir-
ror.

Be careful when judging the size or dis-
tance of any object seen in the outside

rear view mirror on the passenger’s side

because it is a convex mirror. Any object
seen in a convex mirror will look smaller

and farther away than when seen in a flat

mirror.
On some models, when you push the out-

side rear view mirror defogger switch, the

heater panels in the outside rear view
mirrors will quickly clear the mirror sur-

face. (See “Rear window and outside rear

view mirror defoggers and windshield wip-
er de

−

icer” on page 122 in Section 1

−

5.)

Tilt steering wheel

Outside rear view mirrors—

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands