Toyota 2004 HIGHLANDER Owner'S Manual Download Page 125

Page: 125 / 420

’04 HIGHLANDER_U (L/O 0308)

101

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

4. Replace the head restraint and lift it

up to the uppermost lock position.

Be sure to close the cover when the an-

chor bracket is not in use.

Lower anchorages for the child restraint

systems complying with the FMVSS225
or CMVSS210.2 specifications are

installed in the second seat.

The anchorages are installed in the seat

cushion of both outside second seats.
Child restraint systems complying with the
FMVSS225 or CMVSS210.2 specification

can be fixed to these anchorages. In this

case, it is not necessary to fix the child
restraint system with a seat belt on the

vehicle.

Canada only

Type A

—Installation with child

restraint lower anchorages

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands