Toyota 2004 HIGHLANDER Owner'S Manual Download Page 177

Page: 177 / 420

’04 HIGHLANDER_U (L/O 0308)

153

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

When the traction control system is oper-

ating, the following conditions occur:

The system controls the spinning of the
4 wheels. At this time, the slip indica-

tor light blinks.

You may feel vibration or noise in your

vehicle, caused by operation of the

brakes. This indicates the system is
functioning properly.

The slip indicator light comes on for a few

seconds when the ignition key is turned
to “ON”. If the indicator light does not

come on when the ignition is turned on,

contact your Toyota dealer.

“VSC” warning light

This light warns that there is a problem
somewhere in the traction control system

or the vehicle stability control system.
The light will come on when the ignition

key is turned to “ON” and will go off after

a few seconds.
If the light comes on while driving, the

system does not work. However, as con-
ventional braking operates when applied,

there is no problem to continue your driv-

ing.

In the following cases, contact your Toyota

dealer:

The warning light does not come on
after the ignition key is turned to “ON”.

The warning light remains on after the
ignition key is turned to “ON”.

The warning light comes on while driv-

ing.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands