Toyota 2004 HIGHLANDER Owner'S Manual Download Page 88

Page: 88 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

The seat belt pretensioner system con-

sists mainly of the following components
and their locations are shown in the il-

lustration.

1. Front airbag sensors
2. SRS warning light
3. Front passenger occupant classification

system (ECU and sensors)

4. Seat belt pretensioner assemblies
5. Front passenger’s seat belt buckle

switch

6. Airbag sensor assembly

The seat belt pretensioners are controlled

by the airbag sensor assembly. The airbag

sensor assembly consists of a safing sen-
sor and airbag sensor.
When the seat belt pretensioners are acti-

vated, an operating noise may be heard

and a small amount of non

−

toxic gas may

be released. This does not indicate that

a fire is occurring. This gas is normally

harmless.
Once the seat belt pretensioners have

been activated, the seat belt retractors

remain locked.

CAUTION

Do not modify, remove, strike or open
the seat belt pretensioner assemblies,

airbag sensor or surrounding area or

wiring. Failure to follow these instruc-
tions may prevent the seat belt pre-

tensioners from activating correctly,

cause sudden operation of the system
or disable the system, which could

result in death or serious injury. Con-

sult your Toyota dealer about any re-
pair and modification.

NOTICE

Do not perform any of the following

changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the

seat belt pretensioners in some

cases.

Installation of electronic devices

such as a mobile two

−

way radio,

cassette tape player or compact
disc player

Repairs on or near the front seat
belt retractor assemblies

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to

the front end

Repairs made on or near the front

fenders, front end structure or con-

sole

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands