Toyota 2004 HIGHLANDER Owner'S Manual Download Page 308

Page: 308 / 420

’04 HIGHLANDER_U (L/O 0308)

308

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

All season tires, however, do not have

adequate traction performance

compared with snow tires in heavy or

loose snow. Also, all season tires fall

short in acceleration and handling

performance compared with summer

tires in highway driving.

CAUTION

Do not mix summer and all sea-

son tires on your vehicle as

this can cause dangerous han-

dling characteristics, resulting

in loss of control.

Do not use tire other than the

manufacturer’s designated

tires, and never mix tires or

wheels of the sizes different

from the originals.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Toyota 2004 HIGHLANDER, Owner'S Manual, Page: 308 / 420

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews: