Toyota 2004 HIGHLANDER Owner'S Manual Download Page 296

Page: 296 / 420

’04 HIGHLANDER_U (L/O 0308)

296

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

This illustration indicates typical tire

symbols.

1. Tire size—

For details, see “—Tire

size” on page 298.

2. DOT and Tire Identification

Number (TIN)—

For details, see

“—DOT and Tire Identification

Number (TIN)” on page 297.

3. Uniform tire quality gra-

ding—

For details, see “Uniform

tire quality grading” on page 299.

4. The location of the tread wear

indicators—

For details, see

“Checking and replacing tires” on

page 380.

5. Tire ply composition and mate-

rials—

Plies mean a layer of rub-

ber

−

coated parallel cords. Cords

mean the strands forming the plies

in the tire.

6. Radial tire or bias

−

ply tires—

radial tire has “RADIAL” on the

sidewall. The tire not marked with

“RADIAL” is a bias

−

ply tire.

Tire information—

—Tire symbols

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands