Toyota 2004 HIGHLANDER Owner'S Manual Download Page 316

Page: 316 / 420

Finish

’04 HIGHLANDER_U (L/O 0308)

316

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

The gross vehicle weight must not
exceed the Gross Vehicle Weight

Rating (GVWR) indicated on the

Certification Label. The gross ve-
hicle weight is the sum of weights

of the unloaded vehicle, driver, pas-

sengers, luggage, hitch and trailer
tongue load. It also includes the

weight of any special equipment

installed on your vehicle.

The load on either the front or rear

axle resulting from distribution of

the gross vehicle weight on both
axles must not exceed the Gross

Axle Weight Rating (GAWR) listed
on the Certification Label.

Tongue load

Total trailer weight

100 = 9 to 11%

Total trailer weight

Tongue load

The trailer cargo load should be
distributed so that the tongue load

is 9 to 11% of the total trailer

weight, not exceed the following.

2AZ

−

FE engine

136 kg (300 lb.)

3MZ

−

FE engine

158 kg (350 lb.)

Never load the trailer with more
weight in the back than in the

front. About 60% of the trailer load

should be in the front half of the
trailer and the remaining 40% in the

rear.

HITCHES

If you wish to install a trailer hitch, you

should consult with your Toyota dealer.

Use only a hitch recommended by the

hitch manufacturer and the one which
conforms to the total trailer weight

requirement.

The hitch must be bolted securely to
the vehicle frame and installed accord-

ing to the hitch manufacturer’s instruc-

tions.

The hitch ball and king pin should have

a light coat of grease.

Toyota recommends removing the trail-

er hitch whenever you are not towing

a trailer to reduce the possibility of
additional damage caused by the hitch

if your vehicle is struck from behind.
After removing the hitch, seal any

mounting holes in the vehicle body to

prevent entry of pollutants such as ex-
haust fumes, dirt, water, etc.

NOTICE

Do not use axle

−

mounted hitches as

they can cause damage to the axle

housing, wheel bearings, wheels or

tires.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands