Toyota 2004 HIGHLANDER Owner'S Manual Download Page 314

Page: 314 / 420

’04 HIGHLANDER_U (L/O 0308)

314

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Make sure the engine oil viscosity is

suitable for the cold weather.

See page 372 in Section 7

−

2 for recom-

mended viscosity. Leaving a heavy sum-

mer oil in your vehicle during winter

months may cause harder starting. If you
are not sure about which oil to use, call

your Toyota dealer–he will be pleased to

help.

Keep the door locks from freezing.

Squirt lock de

−

icer or glycerine into the

locks to keep them from freezing.

Use a washer fluid containing an anti-
freeze solution.

This product is available at your Toyota

dealer and most auto parts stores. Follow
the manufacturer’s directions for how

much to mix with water.

NOTICE

Do not use engine antifreeze or any
other substitute because it may dam-

age your vehicle’s paint.

Do not use your parking brake when

there is a possibility it could freeze.

When parking, put the transmission into
“P” and block the rear wheels. Do not use

the parking brake, or snow or water accu-

mulated in and around the parking brake
mechanism may freeze, making it hard to

release.

Keep ice and snow from accumulating

under the fenders.

Ice and snow built up under your fenders
can make steering difficult. During bad

winter driving, stop and check under the

fenders occasionally.

Depending on where you are driving,

we recommend you carry some emer-
gency equipment.

Some of the things you might put in the
vehicle are tire chains, window scraper,

bag of sand or salt, flares, small shovel,

jumper cables, etc.

Your vehicle is not designed to be

dinghy towed (with four wheels on the
ground) behind a motorhome.

NOTICE

Do not tow your vehicle with four
wheels on the ground. This may

cause serious damage to your vehicle.

Dinghy towing

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands