Toyota 2004 HIGHLANDER Owner'S Manual Download Page 143

Page: 143 / 420

’04 HIGHLANDER_U (L/O 0308)

119

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

The following adjustments can be made in

this system. For details, contact your

Toyota dealer.

Cancelling the door key or wireless re-

mote control transmitter linked opera-

tion

Changing the timing for the light turn-

ing off

With moon roof

Without moon roof

The personal lights operate separately

with each lens.

To turn on the light, push the lens on your
side. To turn the light off, push the switch

once again.
The center switch has the following posi-

tions:
“DOOR”—Turns the lights on when any of
the side doors or back door is opened.
“OFF”—The lights are off.

ILLUMINATED ENTRY SYSTEM

When the switch is in the “DOOR” posi-
tion and any of the side doors and back

door is opened, the light will come on.

After all the side doors and back door are
closed, the light remains on for about 15

seconds before fading out.
However, in the following cases, the light

fades out immediately:

All the side doors and back door are
closed when the ignition key is in

“ACC” or “ON” position.

The ignition key is turned to “ACC” or

“ON” after all the side doors and back

door are closed.

All the side doors and back door are

locked when the light is still on.

Personal lights

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands