Toyota 2004 HIGHLANDER Owner'S Manual Download Page 272

Page: 272 / 420

’04 HIGHLANDER_U (L/O 0308)

248

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

When the “A/C” button is not pressed in,

pressing another air flow button turns off

the air conditioning.
For details about air flow selector settings,

see “—Air flow selector settings” de-

scribed below.

Air intake selector

Press the button to select the air source.

1. Recirculate—

Recirculates the air inside

the vehicle.

2. Fresh—

Draws outside air into the sys-

tem.

If the engine coolant temperature becomes

extremely high, RECIRCULATE mode will

automatically be selected. This is not a
malfunction. When the engine coolant tem-

perature is lowered, the previous mode

will resume.
To prevent fogging up of the windshield,

the air intake mode may change automati-
cally to FRESH depending on the condi-

tion of the air conditioning system.

“A/C” button

To turn on the air conditioning, press the

“A/C” button. The “A/C” button indicator
will come on. To turn the air conditioning

off, press the button again.
If the “A/C” button indicator flashes, there

is a problem in the air conditioning system

and the air conditioning automatically
shuts off. If this happens, take your ve-

hicle to a Toyota dealer for service.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands