Toyota 2004 HIGHLANDER Owner'S Manual Download Page 95

Page: 95 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

NOTICE

Do not perform any of the following
changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the
SRS front airbag system in some

cases.

Installation of electronic devices
such as a mobile two

−

way radio,

cassette tape player or compact

disc player

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to
the front end

Repairs made on or near the front
fenders, front end structure, con-

sole, steering column, steering

wheel or dashboard near the front
passenger airbag

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS front airbags are oper-

ating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-
sors, curtain shield airbag sensors, driv-

er’s seat position sensor, driver’s seat belt

buckle switch, front passenger occupant
classification system, “AIRBAG ON” indi-

cator light, “AIRBAG OFF” indicator light,

front passenger’s seat belt buckle switch,
seat belt pretensioner assemblies, inflat-

ors, warning light, interconnecting wiring

and power sources. (For details, see “Ser-
vice reminder indicators and warning buzz-

ers” on page 129 in Section 1

−

6.)

If either of the following conditions occurs,
this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your

Toyota dealer as soon as possible.

When the ignition key is turned to the

“ON” position, the light does not come
on, remains on for more than 6 sec-

onds or flashes.

The light comes on or starts flashing

while driving.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands