Toyota 2004 HIGHLANDER Owner'S Manual Download Page 379

Page: 379 / 420

’04 HIGHLANDER_U (L/O 0308)

379

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

5. After completing the tire inflation

pressure measurement and ad-

justment, apply soap water to the

valve and check the leakage.

6. Install the tire valve cap.

If the gauge and the air pump are not

available, have your vehicle checked

by your Toyota dealer.

CAUTION

Be sure to reinstall the tire valve

caps. Without the valve caps, dirt

or moisture could get into the

valve core and cause air leakage.

If the caps have been lost, have

new ones put on as soon as pos-

sible.

Incorrect tire inflation pressure may

waste fuel, reduce the comfort of driv-

ing, reduce tire life and make your ve-

hicle less safe to drive.
If a tire frequently needs refilling,

have it checked by your Toyota deal-

er.

CAUTION

Keep your tires properly inflated.

Otherwise, the following condi-

tions may occur and cause an ac-

cident resulting in death or seri-

ous injuries.
Low tire pressure (underinfla-

tion)—

Excessive wear

Uneven wear

Poor handling

Possibility of blowouts from

overheated tire.

Poor sealing of the tire bead

Wheel deformation and/or tire

separation

A greater possibility of tire

damage from road hazards

High tire pressure (overinfla-

tion)—

Poor handling

Excessive wear

Uneven wear

A greater possibility of tire

damage from road hazards

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands