Toyota 2004 HIGHLANDER Owner'S Manual Download Page 99

Page: 99 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Collision from the rear

Collision from the front

Vehicle rollover

The SRS side airbags and curtain shield

airbags are not generally designed to
inflate if the vehicle is involved in a

front or rear collision, if it rolls over,

or if it is involved in a low

−

speed side

collision.

The SRS side airbag and curtain shield

airbag system consists mainly of the fol-
lowing components, and their locations are

shown in the illustration.

1. SRS warning light
2. “AIRBAG ON” and “AIRBAG OFF” indi-

cator lights

3. Curtain shield airbag modules

(airbag and inflator)

4. Front passenger occupant classification

system (ECU and sensors)

5. Side airbag modules

(airbag and inflator)

6. Curtain shield airbag sensors
7. Side and curtain shield airbag sensors

8. Front passenger’s seat belt buckle

switch

9. Airbag sensor assembly

The SRS side airbag and curtain shield

airbag system is controlled by the airbag
sensor assembly. The airbag sensor as-

sembly consists of a safing sensor and

airbag sensor.
In a severe side impact, the side and

curtain shield airbag sensor and/or the

curtain shield airbag sensor trigger(s) the
side airbag inflators and/or the curtain

shield airbag inflators. At this time a

chemical reaction in the inflators quickly
fills the airbags with non

−

toxic gas to help

restrain the lateral motion of the occu-

pants.
When the airbags inflate, they produce a

fairly loud noise and release some smoke
and residue along with non

−

toxic gas. This

does not indicate a fire. This smoke may

remain inside the vehicle for some time,
and may cause some minor irritation to

the eyes, skin or breathing. Be sure to

wash off any residue as soon as possible
to prevent any potential skin irritation with

soap and water. If you can safely exit

from the vehicle, you should do so imme-
diately.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands