5002S–01
C92272
C92270
4 Spoke
Steering Wheel
Lock Part
3 Spoke
Steering Wheel
Pull Out
–
STEERING COLUMN
STEERING COLUMN ASSY (TMC MADE)
50–9
2244
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
STEERING COLUMN ASSY (TMC MADE)
OVERHAUL
1.
PRECAUTION(See page
50–1
)
2.
DISCONNECT BATTERY NEGATIVE TERMINAL
3.
REMOVE STEERING WHEEL COVER LOWER NO.2
(See page
50–6
)
4.
REMOVE STEERING WHEEL COVER LOWER NO.3(W/O STEERING PAD SWITCH 4 SPOKE
STEERING WHEEL)
(See page
50–6
)
5.
REMOVE CONNECTOR COVER(W/ STEERING PAD SWITCH 4 SPOKE STEERING WHEEL)
(See page
50–6
)
6.
REMOVE STEERING WHEEL COVER LOWER NO.3(3 SPOKE STEERING WHEEL ASSY)
(See page
50–6
)
7.
INSPECT PLACE FRONT WHEELS FACING STRAIGHT AHEAD
8.
REMOVE HORN BUTTON ASSY
NOTICE:
If the airbag connector is disconnected with the ignition
switch being at ON, DTCs will be recorded.
(a)
Using a torx socket wrench, loosen the 2 torx screws until
the groove along the screw circumference catches on the
screw case.
(b)
Pull out the horn button assy from the steering wheel.
(c)
Using a screwdriver, release the lock part of each airbag
connector and disconnect the 2 airbag connectors.
(d)
Disconnect the horn connector. (4 Spoke steering wheel)
NOTICE:
When removing the horn button assy, take care not to pull
the airbag wire harness.
