27061–01
C91816
C66721
–
REAR SUSPENSION
STABILIZER BAR REAR
27–17
1950
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
STABILIZER BAR REAR
REPLACEMENT
HINT:
COMPONENTS: See page
27–2
1.
REMOVE REAR WHEEL
2.
REMOVE REAR STABILIZER LINK ASSY LH
(a)
Remove the 2 nuts and stabilizer bar link.
HINT:
If the ball joint turns together with the nut, use a hexagon
wrench (5 mm) to hold the stud.
3.
REMOVE REAR STABILIZER LINK ASSY RH
HINT:
Remove the RH side by the same procedures with the LH side.
4.
INSPECT REAR STABILIZER LINK ASSY LH
(a)
As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b)
Using a torque wrench, turn the nut continuously at a rate
of 2 – 4 seconds per 1 turn and take the torque reading
on the 5th turn.
Turning torque:
0.05 – 1.0 N·m (0.5 – 10 kgf·cm, 0.4 – 8.7 in.·lbf)
5.
REMOVE STABILIZER BAR REAR
(a)
Remove the 8 bolts, 2 No. 1 brackets and 2 bushings.
