R10426
SST
F40646
207
2.0 mm
(8.15
0.079 in.)
C91604
SST
C91605
SST
F40646
207
2.0 mm
(8.15
0.079 in.)
–
DRIVE SHAFT / PROPELLER SHAFT
FRONT DRIVE SHAFT
30–15
1969
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(e)
Using SST, adjust the clearance of the large clamp.
SST
09240–00020
Crearance: 3.0 – 4.0 mm (0.118 – 0.157 in.)
(f)
Employ the same manner to the outboard joint small boot
clamp.
Crearance: 1.5 – 2.5 mm (0.059 – 0.098 in.)
35.
INSTALL FRONT DRIVE SHAFT DAMPER LH(M/T
TRANSAXLE)
(a)
Set the distance, as described below.
Distance: 207
2.0 mm (8.15
0.079 in.)
(b)
Make sure that the front drive shaft damper LH is on the
shaft groove.
(c)
Place SST onto the front drive shaft damper LH clamp.
SST
09521–24010
(d)
Tighten the SST so that the front drive shaft damper LH
clamp is pinched.
NOTICE:
Do not overtighten the SST.
(e)
Using SST, adjust the clearance of the front drive shaft
damper LH clamp.
SST
09240–00020
Crearance: 0.5 – 1.2 mm (0.020 – 0.047 in.)
36.
INSTALL FRONT DRIVE SHAFT DAMPER
RH(EXCEPT 1MZ–FE ENGINE TYPE)
(a)
Set the distance, as described below.
Distance: 207
2.0 mm (8.15
0.079 in.)
(b)
Make sure that the front drive shaft damper RH is on the
shaft groove.
