P12418
A32958
Front Mark
Front Mark
A13497
Code Mark (2N)
Upward
Painted Mark
No. 1
No. 2
A52526
Front
Side Rail Upper
Side Rail Lower
No. 2
Expander
Compression
No. 1 and
A52527
14–132
–
ENGINE MECHANICAL
CYLINDER BLOCK (2AZ–FE)
1656
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
30.
INSTALL PISTON
(a)
Using a small screwdriver, install a new snap ring at one
end of the piston pin hole.
(b)
Gradually hat the piston to 80 – 90
C (176 – 194
F).
(c)
Align the front marks on the piston with connecting rod,
and push in the piston with your thumb.
(d)
Using a small screwdriver, install a new snap ring on the
other end of the piston pin hole.
31.
INSTALL PISTON RING SET
(a)
Install the oil ring expander and 2 side rails by hand.
(b)
Using a piston ring expander, install the 2 compression
rings with the point mark facing right side.
NOTICE:
Install the compression ring No. 2 with the code mark (2N)
facing upward.
(c)
Position the piston rings so that the ring ends are as
shown.