B56902
2–Piece Type
1–Piece Type
B56906
Retainer
Stopper
Piano Wire
BO3986
70–8
–
WINDSHIELD/WINDOWGLASS/MIRROR
WINDSHIELD GLASS
2541
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
17.
REMOVE WINDSHIELD GLASS
HINT:
There is a case where a 1–piece type and a 2–piece type of
stoppers are installed in a vehicle type.
(a)
Push a piano wire through between the body and glass
from the interior.
(b)
Apply protective tape to the outer surface to keep the sur-
face from being scratched.
(c)
Tie both wire ends to wooden blocks or similar objects.
NOTICE:
w/ Curtain shield airbag:
When working around the curtain shield airbag,be
careful not to damage the airbag.
When separating the glass, take care not to damage
the paint and interior/exterior ornaments.
To prevent the piano wire to be cut, do not cross it.
(d)
Cut the adhesive by pulling the piano wire around it.
(e)
Using a suction rubber, remove the glass.
NOTICE:
Leave as much adhesive on the body as possible when cut-
ting off the glass.
18.
CLEAN WINDSHIELD GLASS
(a)
Using a scraper, remove the damaged stoppers, dam and
adhesive sticking to the glass.
(b)
Clean the outer circumference of the glass with white gas-
oline.
NOTICE:
Do not touch the glass after cleaning it.
Be careful not to damage the body.
19.
INSTALL WINDSHIELD GLASS STOPPER NO.1
(a)
Install 2 new windshield glass stoppers No.1 to the body.