F42650
SST
F40006
SST
F40992
32–16
–
BRAKE
BRAKE MASTER CYLINDER SUB–ASSY
2004
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
17.
INSPECT AND ADJUST BRAKE BOOSTER PUSH
ROD
(a)
Apply SST to the master cylinder.
SST
09737–00011
(b)
Set SST, on the master cylinder, lower the pin of the SST
until it slightly touches the piston.
(c)
Apply the chalk to the flat surfaced tip of the SST pin.
(d)
Turn SST upside down and place it clearance between
the brake booster and SST.
Clearance: 0 mm (0 in.)
HINT:
If there is a clearance between the SST main body and
the booster shell. It means that the specified value, and
no chalk attachment on the booster push rod means that
it is more than the specified value.
Brake booster push rod clearance before shipment is ad-
justed to be
0.105 mm (
0.004 in.).
(e)
Using SST, adjust the booster push rod length until the
push rod lightly touches the pin head.
SST
09737–00020
18.
INSTALL BRAKE MASTER CYLINDER SUB–ASSY
(a)
w/o ABS:
Install the master cylinder sub–assy and 3–way with the
2 nuts.
Torque: 13 N
⋅
m (130 kgf
⋅
cm, 9 ft
⋅
lbf)
(b)
w/ ABS:
Install the master cylinder sub–assy and 2–way with the
2 nuts.
Torque: 13 N
⋅
m (130 kgf
⋅
cm, 9 ft
⋅
lbf)
