Toyota 2002 Camry, Service Manual

Page: 126 / 1283

– SERVICE SPECIFICATIONS ENGINE MECHANICAL
03–15
126
Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
1MZ–FE
Battery specific gravity at 20 C (68 F) 1.25 1.29
New drive belt deflection Pressing force: 98 N (10 kgf, 22 lbf)
For fan and generator
For vane pump
Used drive belt deflection Pressing force: 98 N (10 kgf, 22 lbf)
For fan and generator
For vane pump
9.1 – 10.5 mm (0.358 – 0.413 in.)
7.0 – 9.0 mm (0.276 – 0.354 in.)
11.0 – 13.5 mm (0.433 – 0.531 in.)
10.0 – 12.0 mm (0.394 – 0.472 in.)
New drive belt tension
For fan and generator
For vane pump
Used drive belt tension
For fan and generator
For vane pump
617 – 853 N (63 – 87 kgf, 139 – 192 lbf)
647 – 843 N (66 – 86 kgf, 146 – 190 lbf)
294 – 490 N (30 – 50 kgf, 66 – 110 lbf)
323 – 519 N (33 – 53 kgf, 73 – 117 lbf)
Ignition timing w/ Terminals TC and CG of DLC3 connected
w/ Terminals TC and CG of DLC3 disconnected
8 – 12 BTDC
7 – 25 BTDC
Idle speed 550 – 650 r/min.
Compression pressure 1.47 MPa (15 kgf/cm
2
, 213 psi)
Minimum pressure 0.98 MPa (10 kgf/cm
2
, 142 psi)
Difference between each cylinder 100 kPa (1.0 kgf/cm
2
, 14 psi)
Camshaft circle runout Maximum
Camshaft cam lobe height Standard Intake
Exhaust
Minimum Intake
Exhaust
Camshaft Journal diameter
0.06 mm (0.0024 in.)
42.11 – 42.21 mm (1.6579 – 1.6618 in.)
41.96 – 42.06 mm (1.6520 – 1.6559 in.)
41.96 mm (1.6520 in.)
41.81 mm (1.6461 in.)
26.959 – 26.975 mm (1.0614 – 1.0620 in.)
12 pointed head cylinder head set bolt diameter at tension portion
Standard
Minimum
8.95 – 9.05 mm (0.3524 – 0.3563 in.)
8.75 mm (0.3775 in.)
Valve clearance at cold Intake
Exhaust
0.15 – 0.25 mm (0.006 – 0.010 in.)
0.25 – 0.35 mm (0.010 – 0.014 in.)
Cylinder head warpage Maximum Cylinder block side
Intake manifold side
Exhaust manifold side
0.05 mm (0.0020 in.)
0.10 mm (0.0039 in.)
0.10 mm (0.0039 in.)
Intake valve overall length Standard
Minimum
Intake valve stem diameter Standard
Intake valve margin thickness Standard
Minimum
95.45 mm (3.7579 in.)
94.95 mm (3.7382 in.)
5.470 – 5.485 mm (0.2154 – 0.2159 in.)
1.0 mm (0.039 in.)
0.5 mm (0.020 in.)
Exhaust valve overall length Standard
Minimum
Exhaust valve stem diameter Standard
Exhaust valve margin thickness Standard
Minimum
95.40 mm (3.7559 in.)
94.90 mm (3.7362 in.)
5.465 – 5.480 mm (0.2152 – 0.2157 in.)
1.0 mm (0.039 in.)
0.5 mm (0.020 in.)
Valve spring free length
Valve spring deviation
Maximum
Valve spring installed tension at 33.8 mm (1.331 in.)
45.50 mm (1.7913 in.)
2.0 mm (0.079 in.)
186 – 206 N (19.0 – 21.0 kgf, 41.9 – 46.3 lbf)