5105Q–01
F41598
F41599
–
POWER STEERING
VANE PUMP ASSY (1MZ–FE)
51–17
2284
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
OVERHAUL
NOTICE:
When using a vise, do not over tighten.
When installing, coat the parts indicated by the arrows with power steering fluid
(See page
51–15
).
1.
REMOVE FRONT WHEEL RH
2.
DRAIN POWER STEERING FLUID
3.
REMOVE FRONT FENDER LINER RH
4.
REMOVE FRONT FENDER APRON SEAL RH
5.
DISCONNECT OIL RESERVOIR TO PUMP HOSE NO.1
(a)
Remove the clip and disconnect the oil reservoir to pump hose No.1.
NOTICE:
Take care not to spill fluid on the V belt.
6.
REMOVE POWER STEERING OIL PRESSURE SWITCH
(a)
Disconnect the connector.
(b)
Remove the power steering oil pressure switch from the union bolt.
NOTICE:
Be careful not to drop the power steering oil pressure switch.
If the power steering oil pressure switch is dropped or strongly damaged, replace it with a new one.
7.
DISCONNECT PRESSURE FEED HOSE
(a)
Using a spanner (24 mm) to hold the pressure port union,
remove the union bolt and gasket.
8.
REMOVE VANE PUMP V BELT
(a)
Loosen the 2 bolts and remove the vane pump V belt.
9.
REMOVE VANE PUMP ASSY
(a)
Remove the 2 bolts and vane pump assy.
