320D5–01
R00285
F06408
BR1534
SST
–
BRAKE
REAR DRUM BRAKE
32–39
2027
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
OVERHAUL
HINT:
COMPONENTS: See page
32–38
Overhaul the RH side by the same procedures with LH side.
1.
REMOVE REAR WHEEL
2.
DRAIN BRAKE FLUID
NOTICE:
Wash off the brake fluid immediately if it comes into contact with a painted surface.
3.
REMOVE REAR BRAKE DRUM SUB–ASSY
HINT:
If the brake drum cannot be removed easily, do the following
steps.
(a)
Insert a bent wire or equivalent through the hole in the
brake drum, and hold the automatic adjusting lever away
from the adjuster.
(b)
Using a screwdriver, reduce the brake shoe adjustment
by turning the adjuster.
(c)
Remove the rear brake drum sub–assy.
4.
INSPECT BRAKE DRUM INSIDE DIAMETER
(a)
Using a brake drum gauge or equivalent, measure the in-
side diameter of the drum.
Standard inside diameter: 228.0 mm (8.976 in.)
Maximum inside diameter: 230.6 mm (9.079 in.)
5.
REMOVE TENSION SPRING
(a)
Remove the tension spring from the front brake shoe and rear brake shoe.
6.
SEPARATE PARKING BRAKE SHOE STRUT SET LH
(a)
Using SST, disconnect the shoe return spring and sepa-
rate the parking brake shoe strut set LH.
SST
09703–30010
NOTICE:
Do not damage the wheel cylinder boot.
