C83022
F40147
F40136
F40152
–
DRIVE SHAFT / PROPELLER SHAFT
FRONT DRIVE SHAFT
30–19
1973
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b)
Install a new cotter pin.
NOTICE:
If the holes for the cotter pin are not aligned, tighten the nut further to 60
.
46.
INSTALL SPEED SENSOR FRONT LH(W/ ABS)
(a)
Install the sensor wire and front flexible hose No.1 to
shock absorber with the bolt.
Torque: 18.8 N
⋅
m (192 kgf
⋅
cm, 14 ft
⋅
lbf)
(b)
Install the sensor wire clamp.
(c)
Install the speed sensor front LH to the steering knuckle
LH with the bolt.
Torque: 8.0 N
⋅
m (82 kgf
⋅
cm, 71 in.
⋅
lbf)
NOTICE:
Be careful not to damage the speed sensor.
Prevent foreign matter from being attached.
Do not twist the sensor wire when installing the sen-
sor.
47.
INSTALL FRONT STABILIZER LINK ASSY LH
(a)
Install the front stabilizer link assy LH with the nut.
Torque: 74 N
⋅
m (755 kgf
⋅
cm, 55 ft
⋅
lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
48.
INSTALL FRONT AXLE HUB LH NUT
(a)
Install a new front axle hub LH nut.
Torque: 294 N
⋅
m (2,998 kgf
⋅
cm, 217 ft
⋅
lbf)
(b)
Using chisel and hammer, stake the front axle hub LH nut.
49.
INSTALL FRONT WHEEL
50.
ADD AUTOMATIC TRANSAXLE FLUID(A/T TRANSAXLE)(See page
40–1
)
51.
INSPECT AUTOMATIC TRANSAXLE FLUID(A/T TRANSAXLE)
52.
ADD MANUAL TRANSAXLE OIL(M/T TRANSAXLE)
53.
INSPECT MANUAL TRANSAXLE OIL(M/T TRANSAXLE)