7509C–01
B56617
Clip
Clip
B56609
Clip
B56618
Clip
75–16
–
ENGINE HOOD/DOOR
REAR DOOR
2696
Author:
Date:
2002 CAMRY REPAIR MANUAL 185W (RM881U)
OVERHAUL
HINT:
Installation is in the reverse order of the removal. But the installation is indicated only when it has a
point.
In the LH side, work in the same procedure as in the RH side.
1.
REMOVE POWER WINDOW REGULATOR SWITCH
ASSY REAR
(a)
Remove the rear door armrest base cover lower.
(b)
Remove the screw.
(c)
Using a screwdriver, remove the power window regulator
switch assembly rear then disconnect the connector.
HINT:
Tape the screwdriver tip before use.
2.
REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG
LH
(a)
Using a screwdriver, remove the rear door inside handle
bezel plug.
HINT:
Tape the screwdriver tip before use.
3.
REMOVE REAR DOOR TRIM BOARD SUB–ASSY LH
(a)
Remove the 4 screws.
(b)
Using a screwdriver, remove the clip.
(c)
Using a screwdriver, remove the rear door trim board.
HINT:
Tape the screwdriver tip before use.
(d)
Remove the inside handle then disconnect the 2 cables
from the rear door lock assembly.
4.
REMOVE REAR DOOR LOWER FRAME PLATE SUB–ASSY LH
(a)
Remove the 3 screws and rear door lower frame plate.
5.
REMOVE REAR DOOR SERVICE HOLE COVER LH
(a)
Disconnect each connector and remove the rear door service hole cover.
NOTICE:
Remove the remaining tape on the body side.
6.
REMOVE REAR DOOR GLASS WEATHERSTRIP INNER LH
7.
REMOVE REAR DOOR GLASS RUN LH
