C92363
Screw Extractor
C90811
C90812
50–26
–
STEERING COLUMN
STEERING COLUMN ASSY (TMMK MADE)
2261
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
27.
REMOVE STEERING COLUMN UPPER W/SWITCH
BRACKET ASSY
(a)
Using a centering punch, mark the center of the 2 lap-
ered–head bolts.
(b)
Using a 3 – 4 mm (0.12 – 0.16 in.) drill, drill into the 2 bolts.
(c)
Using a screw extractor, remove the 2 bolts and steering
column upper w/ switch bracket assy.
28.
REMOVE STEERING COLUMN CLAMP UPPER
29.
REMOVE IGNITION SWITCH LOCK CYLINDER ASSY
(a)
Place the ignition switch lock cylinder assy at the ACC
position.
(b)
Push down the stop pin with a screwdriver, and pull out
the cylinder assy.
30.
REMOVE UN–LOCK WARNING SWITCH ASSY
(a)
Disconnect the un–lock warning switch assy connector
from the ignition or starter switch assy.
(b)
Remove the un–lock warning switch assy.
31.
REMOVE IGNITION OR STARTER SWITCH ASSY
(a)
Remove the 2 screws and ignition or starter switch assy from the steering column bracket assy.
32.
INSTALL IGNITION OR STARTER SWITCH ASSY
(a)
Install the ignition or starter switch assy to the steering column bracket assy with the 2 screws.
