67094–01
BE4029
Tester Probe
Tin Foil
Heat Wire
E32576
BE0150
Repair Point
Masking Tape
Broken
Wire
BE0151
Repair Point
Fine Tip Brush
Glass
67–26
–
AUDIO & VISUAL SYSTEM
WINDOW GLASS (ANTENNA WIRE)
2522
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
WINDOW GLASS (ANTENNA WIRE)
REPAIR
1.
INSPECT WINDOW GLASS (ANTENNA WIRE)
NOTICE:
When cleaning the glass, use a soft, dry cloth, and wiper
the glass in the direction of the wire. Take care not to dam-
age the wires. Do not use detergents or glass cleaners with
abrasive ingredients. When measuring voltage, wind a
piece of tin foil around the top of the negative probe and
press the foil against the wire with your finger, as shown in
the illustration.
(a)
Inspect the continuity, at the center of each antenna wire,
as shown in the illustration.
2.
REPAIR WINDOW GLASS (ANTENNA WIRE)
(a)
Clean the broken wire tips with a grease, wax and silicone
remover.
(b)
Place the masking tape along both sides of the wire to be
repaired.
(c)
Thoroughly mix the repair agent (Dupont paste No.
4817).
(d)
Using a fine tip brush, apply a small amount to the wire.
(e)
After a few minutes, remove the masking tape.
(f)
Do not repair the defogger wire for at least 24 hours.
