H41534
SST
H41078
10 m (33 ft) or more
SST
Battery
–
SUPPLEMENTAL RESTRAINT SYSTEM
CURTAIN SHIELD AIR BAG ASSY LH
60–45
2428
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c)
Install the SST.
(1)
Connect the connectors of the 2 SST to the curtain
shield airbag assy LH connector.
SST
09082–00700, 09082–00801 (09082–10801,
09082–20801)
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(2)
Move the SST to at least 10 m (33 ft) away from the
rear of the vehicle.
(3)
Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4)
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the negative (–)
terminal.
(d)
Deploy the airbag.
(1)
Confirm that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2)
Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(e)
Dispose of the curtain shield airbag assy LH.
CAUTION:
The curtain shield airbag assy is very hot when the
airbag is deployed, so leave it alone for at least 30
minutes after deployment.
Use gloves and safety glasses when handling a cur-
tain shield airbag assy with the deployed airbag.
When moving a vehicle for scrapping which has a
curtain shield airbag assy with the deployed airbag,
use gloves and safety glasses.
Do not apply water, etc. to a curtain shield airbag assy
with the deployed airbag.
Always wash your hands with water after completing
the operation.
HINT:
When scrapping a vehicle, deploy the airbag and scrap the ve-
hicle with the curtain shield airbag assy still installed.
