51–48
–
POWER STEERING
RACK & PINION POWER STEERING GEAR ASSY
2315
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
68.
CONNECT TIE ROD ASSY LH
(a)
Connect the tie rod assy LH with the nut.
Torque: 49 N
⋅
m (500 kgf
⋅
cm, 36 ft
⋅
lbf)
(b)
Install a new cotter pin.
NOTICE:
If the holes for a new cotter pin are not aligned, tighten the nut further up 60
.
69.
CONNECT TIE ROD ASSY RH
HINT:
Connect the RH side by the same procedures with LH side.
70.
INSTALL FRONT WHEEL
Torque: 103 N
⋅
m (1,050 kgf
⋅
cm, 76 ft
⋅
lbf)
71.
ADD POWER STEERING FLUID
72.
BLEED POWER STEERING FLUID
73.
CHECK POWERSTEERING FLUID LEAKAGE
74.
INSTALL SPIRAL CABLE SUB–ASSY
(See page
50–9
,
50–22
)
75.
CENTER SPIRAL CABLE(See page
50–9
,
50–22
)
76.
INSTALL STEERING WHEEL ASSY
(See page
50–9
,
50–22
)
77.
INSTALL HORN BUTTON ASSY
(See page
50–9
,
50–22
)
78.
INSPECT AND ADJUST FRONT WHEEL ALIGNMENT(See page
26–5
)
79.
INSPECT STEERING WHEEL CENTER POINT
80.
INSPECT SRS WARNING LIGHT(See page
05–690
)