H41415
H41416
Marks
50–30
–
STEERING COLUMN
STEERING COLUMN ASSY (TMMK MADE)
2265
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
53.
INSTALL INSTRUMENT PNL INSERT SUB–ASSY LWR LH
54.
INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
55.
INSTALL COWL SIDE TRIM SUB–ASSY LH
56.
INSTALL FRONT DOOR SCUFF PLATE LH
57.
CENTER SPIRAL CABLE
(a)
Check that the ignition switch is to OFF.
(b)
Check that the battery negative terminal is disconnected.
NOTICE:
Do not start the operation for 90 seconds after removing
the terminal.
(c)
Turn the cable counterclockwise by hand until it becomes
harder to turn.
(d)
Then rotate the cable clockwise about 2.5 turns to align
the marks.
HINT:
The cable will rotate about 2.5 turns to both right and left of the
center.
58.
INSTALL STEERING WHEEL ASSY
(a)
Align the matchmark with the one on the steering wheel assy and steering main shaft assy.
(b)
Install the steering wheel assy with the set nut.
Torque: 50 N·m (510 kgf·cm, 37 ft·lbf)
(c)
Connect the connector.
59.
INSPECT HORN BUTTON ASSY
(See page
60–15
)
