C69656
C69658
C69659
C70507
A
B
41–68
–
MANUAL TRANSMISSION/TRANSAXLE
OUTPUT SHAFT ASSY (E351)
2198
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b)
Check the clearance between the synchronizer ring No.2
and 2nd gear while pushing it to the synchronizer ring
No.2.
Standard clearance:
0.70 – 1.45 mm (0.0276 – 0.0571 in.)
If the standard clearance is out of the specification, replace the
synchronizer ring set No.2 with a new one.
22.
INSPECT SYNCHRONIZER RING SET NO.1
(a)
Coat the 1st gear cone with gear oil. Turn the synchroniz-
er ring set No.1. in one direction while pushing it to the 1st
gear cone. Check that the ring locks.
(b)
Check the clearance between the synchronizer ring set
No.1 and 1st gear while pushing it to the cone of synchro-
nizer ring set No.1.
Standard clearance:
0.70 – 1.45 mm (0.0276 – 0.0571 in.)
If the standard clearance is out of the specification, replace the
synchronizer ring set No.1 with a new one.
23.
INSPECT REVERSE GEAR
(a)
Using a vernier calipers, measure the reverse gear
groove and thickness of the claw part on gear shift fork
No.1, and calculate
Standard clearance:
0.15 – 0.35 mm (0.0059 – 0.0138 in.) {A – B}
If the clearance is out of the specification, replace the reverse
gear and gear shift fork No.1 with the new one.
