760CA–01
B56420
Protective Tape
–
EXTERIOR/INTERIOR TRIM
FRONT DOOR BELT MOULDING ASSY LH
76–9
2712
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT DOOR BELT MOULDING ASSY LH
REPLACEMENT
HINT:
Installation is in the reverse order of the removal. But the installation is indicated only when it has a
point.
In the RH side, work in the same procedure as in the LH side.
1.
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY
(See page
75–8
)
2.
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
(See page
75–8
)
3.
REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
(See page
75–8
)
4.
REMOVE FRONT DOOR TRIM BOARD SUB–ASSY LH
(See page
75–8
)
5.
REMOVE OUTER REAR VIEW MIRROR ASSY LH
(See page
75–8
)
6.
REMOVE FRONT DOOR BELT MOULDING ASSY LH
(a)
Put protective tape under the front door belt moulding.
(b)
Using a moulding remover or scraper, remove the front
door belt moulding.
HINT:
Tape the scraper tip before use.