Will you register the
next key?
No
Yes
Insert the already registered master key in the
key cylinder
Depress and release the acceleration pedal 5
times.
Depress and release the brake pedal 6 times,
and remove the master key.
Insert a key to be registered in key cylinder.
Depress and release the acceleration pedal 1
time. (Security indicator blinks)
The registration mode is complete when pulling
out the key and depressing and releasing the
brake pedal once or more within 10 secs. after
indicator has been off or 10 sec. have passed.
Within 10 sec.
Within 15 sec.
Within 20 sec.
Within 10 sec.
Within 10 sec.
After 60 sec. additional master key is registration
is complete. (Security indicator is OFF)
73–26
–
THEFT DETERRENT & DOOR LOCK
ENGINE IMMOBILISER SYSTEM
2659
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
2.
REGISTRATION OF ADDITIONAL KEY
There are 2 ways for registration of additional master key; one way is depressing the brake pedal and accel-
eration pedal and the other way is using the hand–held tester.
HINT:
It is possible to register up to 7 master key codes including the already registered key code.
When any operation time described below is over, registration mode will be stopped forcibly.
When the next procedure is started while the timer is working, the timer stops working, then the next
timer starts.
When replacing ”Ignition Cylinder Key Set” or ”Lock Cylinder Set” and register according to the follow-
ing procedure using the original master key. However, after the registration of the additional master
key, the original master key and the original sub–key are not necessary any more, and there fore regis-
tration of those key codes should be deleted.
(1)
Depressing the brake pedal and acceleration pedal: