6007R–01
H42156
60–56
–
SUPPLEMENTAL RESTRAINT SYSTEM
AIR BAG SENSOR ASSY CENTER
2439
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REPLACEMENT
HINT:
COMPONENTS: See page
60–55
1.
PRECAUTION(See page
60–1
)
2.
DISCONNECT BATTERY NEGATIVE TERMINAL(See page
60–1
)
3.
REMOVE CONSOLE PANEL UPPER REAR
(See page
71–12
)
4.
REMOVE CONSOLE BOX CARPET
(See page
71–12
)
5.
REMOVE RR CONSOLE BOX(See page
71–12
)
6.
REMOVE INSTRUMENT PANEL CUP HOLDER TRAY(W/O ASHTRAY)
(See page
71–12
)
7.
REMOVE INSTRUMENT PANEL ASH RECEPTACLE ASSY(W/ ASHTRAY)
(See page
71–12
)
8.
REMOVE CONSOLE PANEL UPPER
(See page
71–12
)
9.
REMOVE CONSOLE BOX FRONT
(See page
71–12
)
10.
REMOVE AIR DUCT REAR NO.1
(See page
55–29
)
11.
REMOVE AIR DUCT REAR NO.2
(See page
55–29
)
12.
REMOVE CONSOLE BOX DUCT NO.1(AUTO AIR CONDITIONER)
(See page
55–29
)
13.
REMOVE AIR BAG SENSOR ASSY CENTER
(a)
Disconnect the 3 connectors from the airbag sensor assy
center.
(b)
Remove the 3 bolts and air bag sensor assy center.
14.
INSPECT AIR BAG SENSOR ASSY CENTER
(See page
60–9
)
15.
INSTALL AIR BAG SENSOR ASSY CENTER
(a)
Check that the ignition switch turn OFF.
(b)
Check that the battery negative terminal is disconnected.
NOTICE:
Do not start the operation for 90 seconds after removing the terminal.
(c)
Temporarily install the air bag sensor assy center with the 3 bolts.
(d)
Tighten the 3 bolts to the specified torque.
Torque: 17.5 N
⋅
m (178 kgf
⋅
cm, 13 ft
⋅
lbf)
(e)
Connect the connector to the air bag sensor assy center.
(f)
Check that no play is identified.
(g)
Check that the water–proof sheet is properly set.
16.
INSPECT SRS WARNING LIGHT(See page
05–690
)