Toshiba TS3000 Series, Instruction Manual

Page: 343 / 368

STE 80720
– 10-46 –
OPERATOR’S MANUAL series Robot Controller
• H display
P L C M o n i t o r ( G R O B O T - > P L C ) 1 / 8
F - - - - - - 8 7 - - - - - - 0
H 0 0 * 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
H 0 1 * 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
H 0 2 * 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
H 0 3 * 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
X Y G H
Select [X], [Y], [G], or [H] to display the data on each contact data of the PLC.
Keys operative in this mode and their operations are shown below.
Key Descriptions
ALT +
↓
or
NEXT or
↓
Used to display the next page. If the cursor is located at the
final page, the top page is selected.
ALT +
↑
or
ALT + NEXT or
↑
Used to display the previous page. If the cursor is located at
the top page, the final page is selected.
ESC
Used to return the system to the utility display.
Operations of each menu are shown below.
Menu Descriptions
[X] Moves to the X display on the PLC monitor.
[Y] Moves to the Y display on the PLC monitor.
[G] Moves to the G display on the PLC monitor.
[H] Moves to the H display on the PLC monitor.
(3) Caution
For detailed information, refer to the separate instruction manual.