OPERATOR’S MANUAL
series Robot Controller
After selecting the copied file name, press the EXE key. When you wish to
create a new file, press [INPUT] and enter the file name.
The selected file name can also be changed like the source file name. The
USB drive can be selected as the copy target by pressing [USB]. When
copying a file from the RAM to the USB or from the USB to the RAM, the copy
source file name is already input.
If you press the ESC key, you can delete a file name. If you further press
the same key, the system returns to the source file name input mode.
: A B C D
Make sure that the input file name is correct, then press the EXE key.
(e) Step 5:
Input through EXE key.
When the confirmation message appears, make sure of the input file name
again. Then press the EXE key.
C
o
p
y R
:
A
B
C - >
R : A B C D ?
O
K T
H
E
N <
E
X E >
[R:] represents RAM, and [U:] represents USB.
(f)
Step 6:
Input through ANY key.
When the file has been copied, the following message appears.
When you press any key on the teach pendant, the system returns to Step 2
and you can continue copying.
C o p y R : A B C
- >
R : A B C D ?
C
o
m
p l e t e
d .
H
I T A
N
Y K
E
Y
STE 80720
– 9-6 –
