PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
20
Item number
(See Figure 8.)
Connector label,
symbol, or end
Description
5
AUX OUT 1
SDI output of the selected SDI, ST2022, or ST2110 input:
•
Quadlink inputs (4k/8k) the Aux out is link 1
•
ST2110-20/30 inputs are supported.
6
AUX OUT 2
SDI output of the selected SDI, ST2022, or ST2110 input:
•
Quadlink inputs (4k/8k) the Aux out is link 1
•
ST2110-20/30 inputs are supported.
7
LTC/GPIO
LTC/GPIO is a D-type, 15-pin connector for future functionality.
8
PPS
PPS connector outputs a 1 PPS (pulse per second) signal when the instrument is locked
to a PTP reference. 3.3v drive. TTL compatible.
9
REF IN
–
OUT
REF IN is used for analog reference signals black burst and tri-level sync for locking.
REF OUT is a pass through of the REF IN.
10
Connector is for an AC power source.
11
DP
Two DisplayPort outputs are for external monitors. The output video format is
1920
×
1080.
1 2
12
HDMI
HDMI port output is for an external monitor. The output video format is 1920
×
1080.
1 2
13
Two USB 3.0 ports are for connecting a mouse and keyboard, importing or exporting
instrument presets, upgrading the instrument firmware, or saving screen and stream
captures.
14
Two USB 3.0 ports are for connecting a mouse and keyboard, importing or exporting
instrument presets, upgrading the instrument firmware, or saving screen and stream
captures.
15
SERIAL
Serial interface, 9-pin connector, is not used.
16
Ethernet port is a standard RJ-45 connector for 10/100/1000Base-T Ethernet cable.
17
Audio input port is for future use.
18
Audio output (1/8-inch
—
3.5mm
—
line out) port is for headphones to listen to the
selected audio channel pair.
3
19
Microphone input port is for future use.
1
When connecting to an external monitor, a monitor with a 1920
×
1080 capable display works best with the instrument.
2
MPI2-25 can drive a maximum of 1 external display.
3
Audio output is an 1/8-inch (3.5mm) diameter port for a headset. It has connections for L and R audio channels. Headset plugs that are an 1/8-inch and have
an additional contact for a microphone may not work because the headphone ports are not set for the spacing requirements of a third connection on the plug.
