PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
xv
Avoid exposed circuitry:
Do not touch exposed connections and components when power is
present.
Do not operate with suspected failures:
If you suspect that there is damage to this product,
have it inspected by qualified service personnel.
Disable the product if it is damaged.
Do not use the product if it is damaged or operates
incorrectly. If in doubt about safety of the product, turn it off and disconnect the power cord.
Clearly mark the product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and
replace when damaged. Do not use probes or test leads if they are damaged, if there is
exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit is
moved from a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the product.
Provide proper ventilation: Refer to the manual's installation instructions for details on
installing the product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise
obstructed. Do not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient for
viewing the display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics
professional to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
Service Safety Summary
The Service safety summary section contains additional information required to safely
perform service on the product. Only qualified personnel should perform service procedures.
Read this Service safety summary and the General safety summary before performing any
service procedures.
To avoid electric shock:
Do not touch exposed connections.
Do not service alone:
Do not perform internal service or adjustments of this product unless
another person capable of rendering first aid and resuscitation is present.
Disconnect power:
To avoid electric shock, switch off the product power and disconnect the
power cord from the mains power before removing any covers or panels, or opening the case
for servicing.
