PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
184
IP Generator application
The IP Generator application provides ST2110 -20/-30 with ST2022-7 test
signals that can be used to check the receiver device and the signal path. (See
Figure 172
.)
NOTE.
The IP Generator application requires Option MP2-GEN.
Figure 172: IP Generator application display
IP Generator application
banner
Select and hold anywhere on the IP Generator application tile to open the
available options. (See
Figure 173
.)
Figure 173: IP Generator application banner
The options adjust the IP Generator application tile:
•
The icon expands the Diamond application tile to the full screen. The
icon collapses the tile back to its original size.
•
The icon expands the tile vertically. If the tile expands it covers the
tile above or below, depending on whether you are expanding the top or
bottom quarter tile. The icon sets the tile to quarter tile size.
•
The icon opens the Diamond application settings menu to adjust the
tile settings.
NOTE.
After the application settings menu is opened, the icon displays.
Select this icon to move the settings menu horizontally.
