PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
169
RTP Sequence Error graph
The RTP Sequence Error
: Shows the RTP sequence information and reports if
any packet is received out of order. (See
Figure 152
.)
Reconstructed path errors
: In addition to counting Path 1 and Path 2 RTP
sequence errors, the number of packets that could not be corrected is shown. An
output packet could be uncorrected if it is dropped on both paths or there is too
much skew between the paths resulting in a buffer overflow.
The number of reconstructed path errors also applies to situations when ST2022-7
is turned off. Packets could pass uncorrected if they are dropped or if reordering
results in an input buffer overflow.
Figure 152: IP Graphs application – RTP Sequence Error graph
