PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
100
Line Select.
Set the slider to On to select 1 Line or Off to select All Lines.
If
1 Line
is selected, the display only shows results for the selected line in the
picture. The line can be selected using the on-screen tools.
(See Line Select
function.)
Or the line can be selected directly on the Picture.
(See
Figure 94
.)
Show Active Area Only.
Use the button to turn Show Active Area Only
On
or
Off
.
When the option is on it removes the trace of vertical / horizontal blanking data.
Gain.
Use the button to change the gain to
x1
,
x2
,
x5
, or
x10
.
Magnification.
Use the button to change the magnification to
Best View
,
x1
,
x10
,
x20
,
x25
, or
x50
.
Waveform application
on-screen tools
You can change the gain, horizontal position, vertical position, cursors, display
mode, display format, and selected line, without opening the Waveform settings
menu, through on-screen tools. Select the tool/button for the setting you want to
adjust. All the available tools are located on the top and bottom of the display and
are highlighted for a few seconds when the application is first opened or if you
select anywhere in the middle of the application tile. (See
Figure 87
.)
Figure 87: Available on-screen tools for the Waveform application
