PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
48
3.
Enter the Source and Destination information for Path 1 and Path 2, if
applicable.
NOTE.
Path 2 is only available if ST2022-7 Seamless Switching is enabled.
You may have to scroll down to see Path 2.
4.
To have the instrument ignore a parameter, select the
Unmasked
control
next to the parameter to change the state to
Masked
.
5.
To edit one of the parameter values, select inside the parameter box to open
the editing display, as shown in
Figure 34
.
Figure 34: Editing parameter fields
6.
When you are done editing, select the
Enter
key.
7.
Scroll down to enter the Source and Destination information for Path 2.
NOTE.
Path 2 is only available if ST2022-7 Seamless Switching is enabled.
8.
Select the Gamma and Color Gamut settings for the video stream.
See
Video IP input settings
for available Gamma and Gamut selections.
9.
Select
Save
and close the menu.
10.
Configure the data rate. (
See Configure the data rate.)
11.
To begin monitoring this input, select the configured input.
(See Input
selection.)
Configure ST2110.
To monitor ST2110 streams:
1.
Select
ST2110
.
2.
Slide the NMOS
control to
Enabled
or
Disabled
. Enabling NMOS allows
