PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
198
•
The icon opens the Jitter Display application settings menu to adjust the
tile settings.
NOTE.
After the Jitter Display application settings menu is opened, the icon
displays. Select this icon to move the settings menu horizontally.
Jitter Display application
settings menu
The Jitter Display application settings menu figure shows the available options.
(See
Figure 188
.)
Figure 188:
Jitter Display application settings menu
Jitter High Pass Filter.
Use the drop-down menu to select the high pass filter to
Timing, Align, 10 Hz, 100 Hz, 1 kHz, 10 kHz, or 100 kHz.
Sweep Mode.
Use the drop-down menu to select 1 Line, 2 Line, 1 Field, or 2 Field.
Jitter Meter.
Use the button to hide or show the jitter meter at the top of the
display.
NOTE.
Eye measurements are displayed when the Jitter Display application is in
full screen mode.
