PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
67
Configure instrument outputs
PRISM allows you to set the SDI OUT connector to Loop-through or Generator.
To change the SDI output:
1.
Select the
Settings
icon (
) to open the Settings menu.
2.
Select
Outputs
to open the Outputs submenu.
3.
Set the SDI output to
Loop-through
or
Generator
. (See
Figure 57
.)
Figure 57: SDI output configuration
4.
Close the Outputs menu.
SDI OUT loop-through of IP inputs is available for ST2022-6 and ST2110-20/30
streams. See the SDI Generator applications for instructions on how to configure
the SDI Generator signal.
SFP loop-through.
Full-time loop-through outputs are available through the SDI
SFP modules installed in the SDI SFP slots.
NOTE.
SDI SFP modules are available in two speed ranges: SD-3G and SD-12G.
